__________________________
Record Created Date:	02/08/2016
* facility ID:
* facility name:
* facility street number:
* facility street prefix:
* facility street name:
* facility street suffix:
facility address2:
* facility city:
* facility county:
facility state:	IN
* facility zip:
* facility contact:
* facility telephone:
* facility Email:
Foundation/Footer status:
Concrete Slab status:
Framing Status:
Plumbing status:
Mechanical status:
Electrical status:
Energy status:
Sprinkler status:
alarm status:
sensitivity current :
Interior status:
Pool status:
Egress status:
Suppression status:
temporary indoor stage:
temporary outdoor stage:
outdoor stage equipment :
canopy:
tent :
ust installation:
ust removal:
project Type(select ll that apply):	New: Addition: Remodel: Occ.Change: Existing:
inspection Category:
inspection type:
inspection status:
inspection Date:	(mm/dd/yyyy)
violation to be corrected by Date:	(mm/dd/yyyy)
* inspector:
notes:
Facility Match?:	(Type in Facility Matched, when you match a complaint inspection with facility.)

print order	code	description	remarks	violation to be corrected by date	violation complied date
0	Sec. 1008.1.10 2014 Edition IFC 675 IAC 22-2.5	Doors serving a Group H occupancy and doors serving rooms or spaces with an occupant load of 50 or more in a Group A or E occupancy shall not be provided with a latch or lock unless it is panic hardware or fire exit hardware. Exception: A main exit of a Group A occupancy in compliance with Section 1008.1.9.3, Item 2. Electrical rooms with equipment rated 1,200 amperes or more and over 6 feet (1829 mm) wide that contain overcurrent devices, switching devices or control devices with exit or exit access doors shall be equipped with panic hardware or fire exit hardware. The doors shall swing in the direction of egress travel.	INSTALL PANIC HARDWARE ON LOWER LEVEL ASEMBLY ROOM EXIT.	03/05/2016

Indiana Department of Homeland Security / Fire and Building Safety Division

2020-21 version